en - External DOS modules and chemical agents
Replacing or re-
filling containers
40
Instructions for use
The external DOS modules automatically dispense chemical agents
at the correct programme stages.
Fill the relevant container with chemical agent when a refill reminder
appears in the washer-disinfector's display.
Refill the container in good time to prevent the dispensing system
being emptied completely.
If a container has been emptied, the dispensing system has to be
vented before the start of the next programme.
Follow the information in the operating instructions for the washer-
disinfector.
Unscrew and remove the siphon and place it on a surface which is
easy to clean.
Fill or replace the container, fit the siphon and secure the lid.
Feed the siphon into the container until it reaches the bottom.
Make sure the hose is not kinked.