Foscam FI9816P Manual Del Usuario página 15

3 VOX (Voice-Operated Transmission) Function
.5
1.
This submenu lets you choose the VOX sensitivity level. With the level set to
high, the microphone will detect lower sounds. See Fig. 13.
2.
When you enable the VOX on the monitor unit, the icon
light up. Press the menu button to back to display screen for complete
setting and the VOX LED will remain ON (blue light).
3.
This will turn off the screen within 10 seconds and enter power
saving mode.
4.
When the sound from the camera reaches the set level, the screen
will turn on automatically and a warning sound will be emitted from
the monitor unit.
Delete Camera
3
.6
In this submenu you can delete a paired camera.
1. Please press which number of cameras you want to delete. See Fig. 14.
2.
Press
Add Camera
3
.7
The system comes with a camera unit that has already been paired with the
monitor unit. The pairing function gives each camera unit a separate channel on
the monitor unit. This is necessary for configuring additional camera units.
1.
In this submenu you can add a new camera. See Fig. 15.
2.
Please choose which number of cameras you want to add, and then press
the icon .
3.
The monitor will wait for pairing and then please also press the pairing button
over three seconds on camera side. You don't need to turn on the power of
camera.
4.
Pairing is completed, it will show "
5. Pairing is failed, it will show the picture on the monitor. See Fig. 17.
3
Flip Function
.8
In this submenu you can flip the video horizontally when mounting the camera
on the ceiling. See Fig. 18.
Display Frequency and White Balance Setting
3
.9
1.
In this submenu you can choose what frequency and color temperature are
better on the monitor. See Fig. 19.
2.
There are three types of color temperature and two frequencies (50Hz or
60Hz).
to delete.
" on the monitor.
will
5