Installation And Removal Steps; Installation; Part List - Multilaser P3214 Manual Del Usuario

3. Installation and Removal Steps

3.1 Installation

This is security installation, please refer to the illustration and detailed step-by-step installation:
1. Put the machine on the right location in the car, connect the machine with reference to the wiring
diagram , test if machine can work properly.
2.
After test OK, wrap the connect wire with insulating tape to ensure that the wiring completely
insulated.
3. Press hook of sets 1 inward, set sets 1 into the dashboard and fix it.
4.
Push machine 2 into metal frame and lock it.
1.
1
Put in the mounting sleeve
3.Installation and Removal Steps
1
2
3
2.
Bend these clown outward for a tight fit, if
necessary.
23

Part list