Shunting Furniture; Removing The Roller Bases; Troubleshooting; Cleaning - Powerfix Profi PMTR 4 A1 Traducción Del Manual De Instrucciones Original

Hint:
The roller bases
table loading surface ¿ . With these you can
subsequently adjust the roller bases
the furniture piece.

Shunting furniture

1.
Adjust the roller bases
face in the same direction.
2.
Pull/push the furniture piece to the desired loca-
tion with the assistance of the roller bases

Removing the roller bases

Hint:
To avoid uneven lifting, always take into account
the load centre of gravity and place the lever
arm on the side to be lifted.
Push the swivelling head ´ of the lever arm
1.
under the furniture and in the middle of it.
Hint:
Hold the lever arm ³ at the hand grip ·.
With this you will require the least effort.
To lift the furniture, slowly press the lever arm ³
2.
down.
Hold the lever arm ³ pressed down.
3.
Remove the roller bases ».
4.
5.
To lower the furniture piece, slowly lift the lever
arm ³.
Remove the lever arm ³.
6.
7.
Repeat the above procedure for the opposite
side of the furniture piece.
are each fitted with a rota-
under
so that the wheels all

Troubleshooting

The furniture piece is very difficult to shunt.
• Adjust the roller bases » so that all of the
wheels are facing in the same direction.
The furniture piece tips easily.
• Place the four roller bases » under the extreme
corners of the furniture piece. Thereby, the furni-
ture piece should be positioned completely over
the four roller bases ».
.

Cleaning

Important
It is possible to damage the lever arm
the four roller bases » by cleaning it.
For cleanng the lever arm
bases » NEVER use spirits, solvents or detergents
that can attack plastics.
Clean the lever arm
» only with a moist cloth.

Storage

In each of the roller bases » there is a hole. With
these holes the roller bases can be hung for
example on a pinboard for hand tools.
The furniture transport set can also be stored in its
original packaging.
- 22 -
and the four roller
and the four roller bases
and