Panasonic PT-LB20NTU Instrucciones De Operación página 36

& Press the F F or G G button to select
an item, and then press the I I or
H H button to change or adjust the
setting.
An individual adjustment screen
such as the one shown below will
be displayed for bar scale items.
B R I G H T
The bar scale will turn green when
any adjustment changes the setting
from the factory set value.
Returning a setting to the factory default
If you press the STD (standard) button on the remote control unit, you can
return settings to the factory default settings. However, the operation of this
function varies depending on which screen is being displayed.
B When a menu screen is being
displayed
P I C T U R E
P I C T U R E M O D E S T A N D A R D
C O N T R A S T
B R I G H T
C O L O R
T I N T
S H A R P N E S S
C O L O R T E M P .
D A Y L I G H T V I E W
A I
T V - S Y S T E M
S T I L L M O D E
S T A N D A R D
S E L E C T E N T E R
All items displayed will be returned
to their factory default settings,
"STD" will be displayed in the top-
right screen and the bar scale will
appear white.
T H E T R U S T E D S O U R C E F O R P R O J E C T O R L A M P S A N D A C C E S S O R I E S
NOTE:
B You can also select
"STANDARD" from the menu
screen and then press the
ENTER button.
3 2
S T D
3 2
3 2
3 2
3 2
8
S T A N D A R D
O N
A U T O
O F F
R E T R N
Unavailable on-screen
menu items
This projector has unadjustable
items and unusable functions
depending on the signal being
input.
When an item cannot be adjusted
or a function cannot be used, the
corresponding on-screen menu
display does not appear, and the
item or function will not work even
if the ENTER button is pressed.
B When an individual adjustment
screen is being displayed
B R I G H T
Only the item displayed will be
returned to the factory default
setting, and the bar scale will
appear white.
NOTE:
B Triangle symbols above and below
the bar scale indicate the factory
default setting. Items which do not
have these triangle symbols
cannot be returned to the factory
default setting.
Indicates the standard factory
default setting
Indicates the current
adjustment value
B The positions of triangle
symbols vary depending on the
type of signal being input.
3 2
E -35
NGLISH