Before Use - TCE 20030 Manual Del Propietário

BEFORE USE

1. Before using this product, read the owner's manual completely and familiarize yourself thoroughly with the
product and the hazards associated with its improper use.
2. Perform the air purge procedure. (See previous instructions for system purge procedure.)
3. Inspect before each use. Do not use if bent, broken or cracked components are noted.
OPERATION
All numbers in parenthesis refer to the index number from the parts breakdown.
1. Carefully bring the lower bolster (19) up and
secure it with support pins (21) and round wire
snap rings (20).
21
20
2. Place bolster plates (18) on press bed frame.
Place work piece on the bed frame or pressing
block, use every precaution necessary to ensure
safety and to prevent accidents. Position work
piece in a manner which will not allow it to
inadvertently fall from the bed frame or pressing
block.
19
3. Place the fence (48) on frame as needed.
4. Familiar with this product.
11
Cylinder
Handle
Release
valve
Quick-slow
valve
Pedal