Brigmton BPHONE-470DC-A Manual De Instrucciones página 12

WPA/WPA2 encrypted network, you should firstly enter the corresponding
password, and then touch the connection.
• Note: When the phone is connected to a wireless network, the status bar
will display Wi-Fi icon and shows the approximate signal strength
(number of strip lit). If you touch the wireless network that the phone is
currently connected to, it will display the name, status, signal strength,
security and IP address of the Wi-Fi network. If you want to remove the
wireless network settings of the phone, touch "Forget notwork" in this
window. If you want to connect to this network again, you should re-enter
those settings.
Note: Unless you choose "Forget network", otherwise the phone chooses
to connect to the encrypted wireless network previously connected does
not need to re-enter the appropriate password. Wi-Fi will automatically
search wireless network, which is the phone without having to perform
additional steps to connect to the network.
Connection to other wireless network:
1) On the screen of Wireless&Network touch Wi-Fi settings. The found
wireless network will be showed on the list.
2) Touch other wireless networks to
connect to the network.
• Note: In addition, the phone can also surf the Internet through the
GPRS.
Users can manually choose to open or close the SIM card data connection
by touching "data connection" through "Settings>SIM card management>
data connection".
BLUETOOTH
Turn on Bluetooth or set the phone can be detected:
1) Press the menu button, then touch System settings.
2) Select the Bluetooth check box to turn on the Bluetooth, then the status
bar will show the icon of Bluetooth.
Touch the "SEARCH FOR DEVICES" to search for Bluetooth devices within
range.
3) Touch the Bluetooth settings, and all discovered devices are displayed
on the list of AVAILABLE DEVICES. (Click on the bluetooth name to set it
can be detected, so that other Bluetooth devices within range will be able
to find the phone.）
Important: The shortest visibility timeout of the phone is two minutes.
Pairing and connecting bluetooth headset: Press the menu button, then
touch Settings. Touch the "SEARCH FOR DEVICES" to search for Bluetooth
devices within range.
If the list can not contain your device, touch "SEARCH FOR DEVICES" to
11