Table of Contents
1. SAFETY INSTRUCTIONS
Important safeguards
Cleaning
Service
Safety messages
2. INTRODUCTION
3. OPERATION CONTROLS
4. PUNCHING PATTERNS
1. SAFETY INSTRUCTIONS
THE SAFETY OF YOU AND OTHERS IS VERY IMPORTANT TO GBC.
IMPORTANT SAFETY MESSAGES AND INFORMATION ARE
CONTAINED IN THIS MANUAL AS WELL AS ON THE MACHINE
ITSELF. PLEASE MAKE SURE YOU CAREFULLY READ AND
UNDERSTAND ALL OF THESE BEFORE OPERATING THE
MACHINE.
THE SAFETY ALERT SYMBOL PRECEDES EACH SAFETY
MESSAGE IN THIS OPERATION INSTRUCTIONS
MANUAL. THIS SYMBOL INDICATES A POTENTIAL
PERSONAL SAFETY HAZARD THAT COULD HURT YOU
OR OTHERS.
THE
FOLLOWING
PICTORIAL
ADVANCEDPUNCH:
This safety message means you could get an
electrical shock because disconnecting power
from this section does not cut off power from
adjacent sections of the machine.
This safety message means that you might get
seriously hurt or killed if you open the product
and expose yourself to hazardous voltage.
NEVER remove the screwed on covers.
ALWAYS refer service requirements to qualified
service personnel.
3
3
3
4
4
4
5
6
IS
FOUND
ON
THE
5. CHANGING THE INTERCHANGEABLE DIE SETS
6. PUNCHING OPERATIONS
Punching Tabs
7. PAPER JAMS
8. PUNCH CONTAINER
9. PROBLEM SOLVING
Fault Codes
10. SPECIFICATIONS
Important safeguards
Use the AdvancedPunch only for its intended purpose of punching
paper and covers according to the indicated specifications.
Retain this Operation Instructions manual for future use.
CAUTION: THE PRINTER ON/OFF SWITCH DOES NOT
CUT OFF POWER FROM THE PUNCH.
CAUTION: THE PUNCH ON/OFF SWITCH DOES NOT CUT
OFF POWER FROM THE PRINTER.
The AdvancedPunch must be connected to a supply voltage
corresponding to the electrical rating of the machine operation
instructions (also listed on the serial number label).
The grounding plug is a safety feature and will only fit into the
proper grounding-type power outlet. If you are unable to insert the
plug into an outlet, contact a qualified electrician to have a suitable
outlet installed.
Do not alter the plug on the end of the cordset (if provided) of the
AdvancedPunch. It is provided for your safety.
Unplug the AdvancedPunch before moving the machine or
whenever the machine is not in use for an extended period of time.
Do not operate the AdvancedPunch if the machine has a damaged
power supply cord or plug. Do not operate the machine after any
malfunction. Do not operate the machine in case of liquid spills, or
if the machine has been damaged in any other way.
Do not overload electrical outlets beyond their capacity. To do so
may result in fire or electrical shock.
Cleaning
You may clean the exterior of the AdvancedPunch using a soft,
damp cloth.
Do not use detergent or solvents as damage to the machine may
occur.
3
AdvancedPunch
GB
7
7
7
7
8
8
8
8