Levenhuk DTX TV Guia Del Usuario página 2

Levenhuk DTX TV
Digital Microscope
EN
Microscope parts
DC-in & USB port
1
HDMI port
2
MicroSD slot
3
LED Dimmer
4
Power on/off
5
Mode (Playback/Photo)
6
The kit includes: microscope, microscope stand, AC adapter, USB cable,
HDMI cable, calibrating scale, software CD, user manual.
Microscope assembly
Take the microscope and all accessories out of the package. Place the stage on a stable surface. Attach the
mount locking ring (17) to the metal tube of the mount. Insert the metal tube into the opening on the stage and
lock it in place with the ring (17). Insert the microscope into the clamp on the mount arm and tighten the locking
screw (14). Tighten the locking knob (13) to lock the mount arm in place. Place a specimen on the stage and use
the coarse focus knob (16) to focus your view. Use the fine focus knob (11) for maximum precision and
sharpness. Upon focusing your view, tighten the focus lock knob (15) to lock the results.
PortableCaptureHD software
Insert the installation CD into your CD drive. The Main Menu window will be displayed. Click the Install
PortableCaptureHD to install the application and follow the instructions on screen. The installation CD contains
a copy of this user manual, which you can read by clicking the corresponding entry in the Main Menu. Connect
the microscope to your PC with a USB cable and run the PortableCaptureHD application. A pop-up message will
warn you if the microscope is not connected to the PC.
2
Menu
7
Capture/OK
8
Down
9
LED
10
Focus wheel
11
Magnification ruler
12
- Screws
13 17
Never, under any circumstances, look directly at the Sun,
another bright source of light or at a laser through this device,
as this may cause PERMANENT RETINAL DAMAGE
and may lead to BLINDNESS.
3
4
13
14
11
12
1 2
5
6
7
8
9
15 16
17
10
Capture
an image
Sequence capture (you can set the time to begin
capturing images or videos, interval between them,
video duration and the number of images or videos
to be captured)
Full screen mode. To exit full screen mode,
press Escape on your keyboard or double-click
anywhere on the screen
Start and stop
video recording