Publicidad
Idiomas disponibles
Idiomas disponibles
DIRT SENSOR
SOME
MODELS
The electronic
dirt sensor
is a feature
which will detect
particles
as they pass
through
the vacuum
cleaner.
The dirt sensor
indicator
is located
on the
front of the switch cover.
The red light indicates
dirt is being picked
up by the cleaner.
OPERATION
As you vacuum,
the red indicator
light will
come on and stay on as long as the
sensor detects
a high concentration
of
particles
passing
through
the cleaner.
No light indicates
that most of the
cleaning
is complete.
/
Switch
I
Cover
Electrical Shock And Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit. Failure
to do so could result in electrical
shock or personal injury from cleaner
suddenly starting.
TO CLEAN DIRT SENSOR OPTICS
The dirt sensor optics consist
of two optic
cells located
inside the bag holder.
Occasionally,
it may become
necessary
to
clean the two optic cells to assure
maximum
performance.
It is
recommended
the optic cells be cleaned:
•When the red light stays on
continuously.
•When dirt or dust adheres
to the
optic cells.
•Whenever
the dust bag is changed.
To clean the sensor, wipe the optic cells
with a soft, dry cloth.
Never use cleaners
or liquids as they can help speed the
recoating
of the optic cells and make it
necessary
to clean them much sooner
than normal. The dirt sensor area can be
reached
by removing
the dust cover and
the dust bag.
Optical
Cell,.
Holder
12
Publicidad
