Sample Weight And Volume (Sample Quantity) - Xylem SI Analytics TitroLine 7500KF Manual De Instrucciones

The values of the individual parameters of the selected calculation formula can be input one by one (Fig. 84).
Fig. 84

4.6.3.2 Sample weight and volume (sample quantity)

The Sample Quantity (W) item (Fig. 85) is used to select whether one is wishing to use a sample weight or a
sample volume for titration or solution preparation (Fig. 86).
Fig. 85
Fig. 86
You have the following options:

«Manual sample weight»: The sample weight is enquired by a prompt at the start of the method and
manually input.

«Automatic sample weight»: The sample weight is automatically transferred by a connected balance.

«Fixed sample weight»: A fixed sample weight is input in g. This weight will then automatically be used
for each start of the method.

«Manual sample volume»: The sample volume in ml is prompted at the start of the method and
manually input.

«Fixed sample volume»: A fixed sample volume is input in ml. This volume will then automatically be
used for each test of the method.
145