Microtiter Plates And Blood Analysis Plates - Miele professional A 103 Instrucciones De Manejo

Microtiter plates
and blood analy‐
sis plates
Arrange microtiter
plates in the E 494
insert
The E 494 insert is designed for the machine reprocessing of microtit‐
er plates and blood analysis plates.
Plastic microtiter plates and blood analysis plates:
For microtiter plates / blood analysis plates made of polycarbonate,
polyacrylic, polystyrene, etc., please note the following:
– Use cleaning agents with hypochlorite or hydrogen peroxide oxidi‐
sing properties.
 Do not use cleaning agents and defoamers containing surfac‐
tants and/or silicone oils.
– Use neutralising agents with a citric acid base.
– Select a cleaning programme with 1 - 2 cold pre-washes.
– The temperature must not exceed 55 °C in the washing and rinsing
blocks.
– After the final rinse, manually tip any remaining water out of the ca‐
vities or wells before drying.
– The temperature when drying in the washer-disinfector must not
exceed 65 °C.
– The temperature when drying in the drying cabinet must not exceed
55 °C.
The instructions of the manufacturer of the microtiter plates or the
blood analysis plates should also be observed.
Push the microtiter plates into the insert holders with the open sides

facing downwards.
Up to two inserts can be used per level. Do not stack the inserts on

top of each other.
en - Areas of application
37