Publicidad
Idiomas disponibles
Idiomas disponibles
USE
HOW TO CONNECT THE ACCES-
SORIES
Make sure that the appliance is di-
sconnected from the mains socket.
Attach the connector (C) to the
heater as follows:
Hook the socket flap on to the
lower hook of the connector.
Pull the flap well open.
Insert the connector into the socket
until it clicks into place.
Press the button to unlock and
extract the connector.
CABLE REWIND
Turn the steam generator as shown
in the diagram in order to rewind the
cable inside the coiler. Fasten the
cable terminal with the special lock.
HANDLE
This is attached to the heater by
means of the connector (C) and
enables all the cleaning accessories
to be attached.
The grip has a button for the distribu-
tion of steam (S) and a safety lock.
To block or release distribution of
the steam use the button positioned
on the side of the grip. The lock and
release position is indicated in the
icon positioned on this grip.
The push-button for delivering steam
is a low voltage (12V) switch.
EXTENSIONS
These are connected to the handle
so that the work field is widened.
The extensions have the same
attachment.
9
Publicidad
