Preparation Before Using This Unit; Turning On The Power - Yamaha TSX-100 Manual De Instrucciones

PREPARATION BEFORE USING THIS UNIT

Turning on the power

1 To AC inlet
STANDBY/ON
6
En
Preparation before using this unit
Connect the power cable to the AC inlet of this unit
and an AC wall outlet.
2 To an AC wall outlet
STANDBY/ON Turn on this unit.
Press again to set this unit to the standby mode.
On the top panel
You can also perform the above operations on the top panel.
Turn on this unit.
y
• During the standby mode, the power consumption is reduced.
• In the standby mode, you can select whether to display the date and time (in the ECO OFF
mode) or not to display them (in the ECO ON mode).
1 While in the standby mode, press and hold the MUTE on the top panel.
The "ECO ON" or "ECO OFF" flashes.
2 While the indicator is flashing, press the MUTE to select "ECO ON" or "ECO OFF".
3 Wait several seconds.
The mode is set to ECO ON or ECO OFF.
Display in
the
standby
mode
• The memory back-up circuit prevents the stored data from being lost even if this unit is in
the standby mode. However, the stored data will be lost if the power cable is disconnected
from the AC wall outlet or if the power supply is cut off for more than one week.
INPUT/SNOOZE
ECO ON mode
(Not displayed)
SLEEP
POWER OFF
Set this unit to
the standby mode.
ECO OFF mode
11:22
12 Oct Fri
(Date and time displayed)