Self-Diagnosis - Haverland TAC-0918 Manual De Instrucciones

PROGRAMMED START UP
-Turn on the appliance and set the working mode you when the appliance recovered from the
timer, for example cooling mode, 25
-Press "ON/OFF" button to switch into STANDBY.
(9 "
-Press the " button twice, the time is displayed and " � "symbol.
-Set the time when you want the appliance to switch off using the " � " buttons (from 30
minutes to 24hours)
-During the first ten hours you can select half intervals. For times longer than ten hours, one
hour intervals can be selected.
(9
-Press the " "button again to confirm the setting, the TIMER symbol light "
control panel light up to indicate the timer is activated.
-At the end of the set time the appliance switches on automatically and operates in the same
working mode as prior to switching into STANDBY, for example cooling mode, 25
high.
-To cancel the TIMER setting. press the "

SELF-DIAGNOSIS

The appliance has a self diagnosis system to identify a number of malfunctions.
Error messages are displayed on the appliance display.
IF IS DISPLAYED,
111
The appliance is fitted with
a frost protection device to
avoid excessive formation
of ice.
The appliance starts up
again automatically when
-
Low
TEMPERATURE
the defrosting process is
(frost prevention)
completad.
11 this is displayed, contact
your local authorised servi­
ce centre.
P ROBE FAILURE
(sensor damaged)
111
Empty the interna! safety tank,
following the instructions in the
"End of season operations"
paragraph.
FULL TANK
(safety tank full)
°
C, fan speed high.
(9
"button again whenever during the set time
WHAT SHOULD I DO?
64
m "
on
°
C, fan speed