46264.001.01
PoE Ethernet Extender
The PoE Ethernet Extender 46264.001.01 is used for the communication and power supply of PoE devices if the distance between
the PSE (Power Sourcing Equipment) and the PD (Powered Device) is greater than 100 m.
The product supports standards IEEE802.3u, 100Base-TX and IEEE802.3 af/at; it can be connected in cascade with other ex-
tenders provided the distance between one extender and another is not more than 100 m. It supports full duplex transmission at
100 Mbps with effective protection against electrostatic discharge (ESD) and temporary overvoltage (TOV). The device also has
protection rating IP40.
Wiring diagram:
Characteristics
• Each unit can repeat and extend both signal and power supply up to 100 m and, when connected in cascade, up to 400 m.
• It supports standards IEEE 802.3u,100Base-TX and IEEE 802.3af/at.
• The device creates no delay in the Ethernet signal transmission: it works in real time.
• Protection against electromagnetic discharge and temporary overvoltage.
• Plug and play connection.
Warnings
1) Use a cat 5e/6 cable to obtain the maximum transmission distance.
2) Ensure that the PoE transmission direction is correct.
Material supplied:
Before installation, check that the following components are present; contact your retailer for any missing components.
• 1 PoE Ethernet repeater
• 1 User manual
6
L C
D i
D
a p
l a
y