Black and Decker BDC204-LA Manual De Instrucciones página 13

FEATURES
• Compact, lightweight, completely portable – use with vehicle or boat's 12 volt DC
accessory outlet, or appropriate 12 volt DC power supply
• Non-wearing thermoelectric system cools to approx. 22.2°C (40°F) below
surrounding air temperature or warms to approx. 48.8°C (120°F)
• Use with standard household containers or ready-to use packaging
• Rests on vehicle seat or floor for easy access
• Extra-long, 7-foot, 12 volt DC power cord with built-in 5-amp fuse protected plug
to protect the unit and power source
• Convenient, detachable shoulder strap for easy portability
• Durable, weather resistant construction with easy-open and close lid
• Cold/heat transfer to foods via temperature-efficient liner
• Built-in heat dissipation fan with long-life, brushless motor
• COOL/OFF/WARM sliding power switch
• Automatic shut-off to prevent overheating of unit
• Built-in LED "cool" and "warm" indicators
CAUTIONS
• This unit is intended for use with a 12 volt DC power source that can
provide at least 4 amperes of current. DO NOT attempt to use with any
other power source.
• NEVER operate unit in an enclosed space. ALWAYS ensure that there is
adequate ventilation and free flow of air around the unit, so that air
expelled by the fan is effectively dissipated.
• When operating the unit in a vehicle or boat cabin, adequate ventilation
must be provided by an air conditioning system or open window. In a car
with windows up, air temperatures can reach 65.5°C (150°F ) degrees.
• This unit is intended for portable use only; it is not designed to be built-
in or recessed – this would interfere with the unit's air dissipation system,
and could cause a fire or other safety hazard.
• Use only with the supplied power cord. If cord becomes worn or
damaged, discontinue use and call your service center for
authorized replacement.
• Never allow the cooler/warmer to be immersed in water or other liquid.
This will void the warranty.
23
COOL/WARM
POWER SWITCH
COOL/WARM LED
INDICATORS
ADJUSTABLE
SHOULDER STRAP
POWER CORD
STORAGE
USING THE TRAVEL COOLER/WARMER AS A COOLER
Connecting to a vehicle's 12 volt DC accessory outlet,
for extended use:
1. Make sure that the unit's COOL/WARM/OFF switch is in the OFF position.
Start vehicle, or turn ignition to "accessory" position.
2. Insert the DC plug into the vehicle's 12 volt DC accessory outlet.
3. Move the COOL/WARM/OFF switch on the cooler to the COOL position.
4. The LED COOL indicator will light (GREEN light) to show that the unit is cooling.
5. Put items into the cooler and close the lid. Do not overstuff the cooler or keep
the lid from closing.
6. Keep cooler lid closed during operation and re-close it quickly when adding
items to it or removing items from it.
7. After use, turn the switch to the OFF position and empty the cooler.
8. Disconnect the power cord from the vehicle's accessory outlet and from the
cooler. Clean unit as described in the Care & Maintenance section of this
manual.
9. Store in a cool, dry area out of direct sunlight.
EASY OPEN/CLOSE LID
BUILT-IN AIR
DISSIPATION FAN
24