Velleman CAMSET29 Manual Del Usuario página 4

CAMSET29
1 LCD display 8 User Guide - System Information
2 Answer key 9 Menu/OK key indicator
3 Left key 10 Right key indicator
4 Right key 11 Left key indicator
5 Menu/OK key 12 Battery status
6 Time 13 System Settings
7 Date 14 Visitor Records
5. Installation
Step 1 Remove the existing peephole
viewer.
Make sure the hole matches the
camera (range between 13mm
and 28mm).
If necessary, drill a new hole.
Step 2 Screws are included in the
package.
o Use the short screws if the
door is less than 65 mm thick.
o Use the long screws if the door
is between 65 and 95 mm.
Insert the appropriate screws into
the camera part.
Do not tighten the screws yet.
V. 01 – 12/02/2013 4 ©Velleman nv