Scan Function - Midland TRUCK GUARDIAN WIRELESS Manual De Usuario

2. Rear camera to help you while reversing (set on channel 2)
3. Connecting TRIG[2] (white wire) to the reverse, the monitor will automa-
tically switch to view rear camera when reverse gear is inserted.
4. When reverse gear is switched off, monitor will return to show the front
camera (this function is active on all 4 channels)
Important: the unit records only what you see on the screen. When the TRIG is
activated, the unit records the video from the triggered channel.
If you want to have the recording always enabled on a defined channel, you
don't have to use the TRIG function, but to activate the SPLIT view (from
MODE  SPLIT).
Note: Install the display in such a way not to obstruct the view.
Quick use
1. Insert the SD card (if you are interested in recording the images).
2. Turn ON monitor and camera to start viewing images.
3. Press MODE button to start recording (
time the monitor is turned OFF and then ON, the recording will auto-
matically start.
4. Press CAM button to change the camera view on the monitor.
5. Press MENU button to open menu and change settings.

SCAN function

Turn ON this function from CAM-SETUP  AUTOSCAN menu, to cycli-
cally switch from one camera to another one at pre-set time intervals in
CAM-SETUP  SCANTIME menu.
To activate this function press the CAM button till you see
REC symbol will appear). Every
Scan in the display.
15
Menu
You can access the menu only while in single cam view mode (with split view it
is not possible to open menu).
Push MENU button, you will find the following options:
MODE
PICTURE
MIR-FLIP
RECORD
CAM-SETUP
SYSTEM
PLAY
PAIRING
1. Use ▼ and ▲ button to scroll menu items.
2. Press MODE button to enter menu items and confirm.
3. Press MENU button to exit.
MODE
• Split: you can view 2 cams at the same time
• Quad: you can view 4 cams at the same time
• H- Split: you can view 4 cams at the same time
• Off: you can view cams one by one
PICTURE
• Brightness: you can set the brightness of the image
• Contrast: you can set the image contrast
• Hue: you can set the image hue
• Volume: you can set the audio volume
MIR-FLIP
• Normal: image is normal
• Mirror: image is horizontally mirrored
• Flip: image is 180° rotated