HQ-Power VL118USB Manual Del Usuario página 6

Charging Mode
• Place the mode switch in the charge mode.
• Open the base unit by sliding the battery cover toward the USB in/output. Insert 2 or
4 batteries into the base unit.
• Insert one end of the USB cord into the base unit. Connect the other end to your
computer's USB port (computer must be switched on) or the car adapter (insert the
adapter into the vehicle's power outlet).
• The red LED indicator will light. The LED will turn green as soon as the batteries are
fully loaded.
Using the Unit as a Power Device
• Place the mode switch in the use mode.
• Choose whether to power your device using the base unit or the car adapter. To
use the base unit, open by sliding the battery cover toward the USB in/output. Insert
4 (rechargeable or non-rechargeable) batteries into the base unit.
• Insert one end of the USB cord into the base unit or car adapter. Connect the other
end to your device.
Using the Flashlight
• Place the mode switch in the use mode.
• To use the base unit, open by sliding the battery cover toward the USB in/output.
Insert 4 (rechargeable or non-rechargeable) batteries into the base unit. You can
also connect the base unit to your computer's USB port (computer must be
switched on) or the car adapter (insert the adapter into the vehicle's power outlet).
• Slide the on/off switch to use the flashlight.
VL118USB 6 HQPOWER