Heidolph Laborota 4000 Manual De Instrucciones página 107

VAC senso T /
Rotavac vario
control power
supply (Laborota
4002 / 4003 control)
1.02
Fig. 4-29: VAC senso T / ROTAVAC vario control power supply
A VAC senso T
B ROTAVAC vario control
1 main power switch
2 LED
3 locking screws
4 VAC senso T / Rotavac vario
control connection
5 bolt
1. Remove the positioning screws (3) from the locking tubes on the back of
the instrument.
2. Insert the VAC senso T / ROTAVAC vario control power supply and
bolts (5) into the locking tubes.
3. Secure the power supply with the positioning screws (3).
4. Establish connections (4, 6, 8, 9, 10, 11, 12).
Laborota 4000/4001 efficient, 4010/4011 digital, 4002/4003 control
Setup and initial use
6 vacuum connector
7 aeration/inert gas
8 power connection
9 Laborota 4002 / 4003
connection
10 ROTAVAC vario control vacuum
pump
11 vacuum valve
12 vacuum switch box
105