Taurus ALPATEC AC 260 KT Manual Del Usuario página 23

temperature is between 12 and 32ºC.
- Ensure that the extraction pipe remains
in a horizontal position. (Fig 2)
Bow alignment
Incorrect bending
- Do not add new sections to the
extraction tube provided, as it could
cause the appliance to malfunction.
- The appliance should be used with its
base feet fitted.
- The appliance should be used with its
wheels attached.
Assembly of the exhaust hose
-Lengthen one head of the hose, and spin the
exhaust hose into exhaust connector (counter-
clockwise).
- Caution: Exhaust pipe is 60 cm~170 cm long
(including adapter).
- The length of exhaust pipe is especially
designed in accordance with the specifi cation
of the air conditioner. Please do not use other
exhaust pipes of different lengths or materials,
in such way failure may be caused.
Installation of window kit
- Partially open the window and then fi x the
window kit to the window.
-The window kit can be installed on most of normal
Notice AC 260 KT.indb 23
and vertical windows and it is adjustable.
- Fix the other end of the heat-exhausted hose to
the air-outlet window kit.
Instructions for use
Use:
- Unroll the cable completely before plugging it in.
- Connect the appliance to the mains.
- Press the ON/OFF button, the unit will enter in
cooling mode with low fan speed.
- Press the mode button to select cooling
dehumidifying, fan mode.
Fan Speed
- Under the cooling and the fan mode, the speed
goes as follow:
- Lower Fan-> Mid Fan-> High Fan.
- Temperature cannot be set.
Timer mode
- In standby mode, press time button to set time
start. Press the up-and-down button to the time of
start (0~24 hours), and time indicator light is on.
- In startup mode, press time button to set time
switch-off.
- Press the up-and-down button to the time of
switch-off (0~24 hours), and time indicator light
is on.
Swing
- Press this button to control the movement of the
louver.
Cooling mode:
- Press mode to select cooling mode, cooling
mode indicator turns on.
English
18/02/2016 19:11