Intended Use; Technical Data - EINHELL PICOBELLA Manual De Instrucciones

Separately available accessories
18V 1.5Ah P-X-C lithium-ion battery
18V 2.0Ah P-X-C lithium-ion battery
18V 2.6Ah P-X-C Plus lithium-ion battery
18V 3.0Ah P-X-C lithium-ion battery
18V 4.0Ah P-X-C lithium-ion battery
18V 5.2Ah P-X-C Plus lithium-ion battery
18V P-X-C Fast Charger
18V P-X-C Dual Port Fast Charger
Explore battery + charger options at
einhellUSA.com

3. Intended use

The equipment is designed for cleaning work
on surfaces in private outdoor areas only.
The surfaces must be suitable for cleaning
using rotating brushes. For wet cleaning
(recommended) the surfaces must also be
insensitive to water.
Sensitive, polished, coated and scratch-sensitive
surfaces can become roughened and/or get
damaged. This equipment must not be used to
clean such surfaces. The equipment may only be
used by guiding it over the ground in a vertical
position. The equipment must not be used in a
horizontal position (e.g. walls) or overhead (e.g.
ceiling). It must not be used for unmade/unpaved
surfaces (e.g. grass pavers).
Use only the brush which is intended to be
used for the surface you want to clean. Test the
brush for suitability on an inconspicuous area
fi rst before using it each time. Diff erent brushes
for diff erent surfaces are available as separate
accessories. Only use water without any additives
whatsoever.
The MEDIUM nylon brush (black) is specifi cally
suitable for cleaning unsealed paver and stone
surfaces. It can therefore also be used for
cleaning surfaces which are paved with paving
stones/concrete blocks or concreted surfaces
(e.g. driveways, decks, paths). The side brush can
be used for cleaning perimeters and bases.
Using the SOFT nylon brush (yellow/green) the
equipment can also be used for cleaning wood,
composite materials (BPC/WPC) or for brushing
(e.g. fl attened areas) artifi cial turf to raise it
upright, as used in the private domain where it is
Anl_Picobella_SPK7_USA.indb 11 Anl_Picobella_SPK7_USA.indb 11
EN
installed, for example, on balconies or decks.
The ULTRA metal brush can be used for cleaning
robust surfaces such as, e.g. paving stones/
concrete blocks, concreted surfaces, granite or
porphyry to remove stubborn dirt.
The equipment is allowed to be used only for its
prescribed purpose. Any other use is deemed to
be a case of misuse. The user/operator and not
the manufacturer will be liable for any damage or
injuries of any kind resulting from such misuse.
Please note that our equipment has not been
designed for use in commercial, trade or
industrial applications. Our warranty will be voided
if the equipment is used in commercial, trade or
industrial businesses or for equivalent purposes.

4. Technical data

Motor power supply: ............................18 V
Speed n : ............................ 800-1400 rpm (min
0
Working width ..........................8.46 in. (215 mm)
Brush diameter ..........................4.5 in. (115 mm)
Max. water inlet pressure ............... 87 psi (6 bar)
Protection class .................................................III
Weight (Tool only) ........................... 9 lbs (4.1 kg)
Wear ear-muff s.
The impact of noise can cause damage to
hearing.
Reduce noise generation and vibration to a
minimum!
•
Use only equipment that is in perfect
condition.
•
Maintain and clean the equipment regularly.
•
Adapt your way of working to the equipment.
•
Do not overload the equipment.
•
Have the equipment checked if necessary.
•
Switch off the equipment when not in use.
•
Wear gloves.
CAUTION!
Residual risks
Even if you use this electric power tool in
accordance with the instructions, certain
residual risks cannot be eliminated. The
following hazards may arise in connection
with the equipment's construction and
- 11 -
)
-1
01.07.2020 11:37:49 01.07.2020 11:37:49