Publicidad
Idiomas disponibles
Idiomas disponibles
English
Description
Using your appliance
ADJUSTING THE HEIGHT OF YOUR ATTACHMENTS (See figure A)
Your attachments are equipped with a system for adjusting the height above the bottom of the
bowl for optimum results.
6. Before using for the first time, clean all parts of the accessories with soapy water, rinse and dry.
7. Place the appliance on a flat, clean and dry surface and then plug in your appliance.
MIXING/KNEADING/BEATING/EMULSIFYING/WHISKING (See figure B)
Depending on the nature of the ingredients, the bowl (7) with its cover can be used to prepare
up to 3 kg of dough.
1. Press button (2) to the release the multifunction head (10) and raise it to a vertical position.
1. Speed control switch
2. Release button for multifunction head
3. Cover
4. Removable cover for mincer power outlet
4.1. Release button for Cutter housing
5. Power outlet for mincer
6. Bowl cover
7. Stainless steel bowl
8. Power outlet for blender
9. Release button for Cover 3
10. Multifunction head
11. Whisk
12. Dough hook
13. Mixer blade
1. Press the release button (2) lift the multifunction head and
insert the mixer blade, dough hook or whisk.
2. Hold it in position.
3. Lower the head of the appliance (10) with the button (2)
press until a click is heard.
4. Adjust the height by turning the shaft: adjust the accessories
to the ideal position.
5. Lift the head (10) of the appliance again, hold the Mixer
blade, Hook or whisk in position.
2. Fit the bowl (7) onto the appliance by turning until it locks in
position and place the ingredients in it.
3. Position the cover on the head with the filling opening at the
front of the appliance.
4. Fit the desired accessory (11, 12, 13) in the power outlet,
pushing the shaft of the accessory home and turn it a
quarter turn towards you to lock it in position.
5. Lower the multifunction head of the appliance to horizontal
position and press button again (a click should be heard).
- 4 -
Publicidad
