dirna Bergstrom TRP LITE Instrucciones De Montaje página 14

LITE
EN
Assembly
Recommendations
• Before starting assembly, please read instructions and
follow them during installation process.
• Use the adequate tools for each operation.
Electricity
• Disconnect ignition key.
• Disconnect battery before starting assembly.
• Make sure electric components are securely connected,
checking their correct fitting.
! Warning
If the unit slants during assembly, wait for at least
60 minutes with the unit in horizontal position before
starting it up.
! Warning
When installing air conditioning equipment on roof,
the upper cabin part must be protected with a cloth
or a protective blanket to avoid possible scratches.
When installing Compact Pro on roof, take into
account that, normally, cabins equipped with a hatch
have a strong enough structure to hold equipment
weight. However, if it is not the case and it is
necessary to carry out a cut in the roof or, although
it has a hatch, the material is not resistant enough
(if roof is made of fibre, plastic, etc...), it is the installer
who will have to decide, under his responsibility, if it
is necessary to reinforce the roof to avoid possible
deformations, breaks, water entries, etc., habilitating
the means required to stop it from occurring.
With DAF XF 105 high, plastic roof cabins, take
special care and only rest on cabin nerves to avoid
fibre part from sinking.
Torx wrenches set
Allen wrenches set
Open-jawed spanner 10, 13, 14, 20
Scissors
Flexo-meter
Related documentation
Mounting instructions
User's guide
Troubleshooting
Parts list
Documentation included
Quick guide
Warranty
Fragile
Beware of cuts!
Electrical hazard
!
The installing personnel must have a sufficient
training in vehicles air conditioning.
!
Bergstrom shall not be responsible for breakdowns
or damages coming from an inadequate handling or
installation of the equipment or from modifications
and substitutions carried out without our express
and written authorisation.
!
Equipment pre-charged with refrigerating gas.
(Do not handle refrigerating gas circuit).
!
Please see product warranty procedure included
in Troubleshooting.
!
Please see equipment User's Guide for its correct
functioning of the remote control and control panel.
!
Once installation is finished, the following documents
must be handed over to the user: User's Guide,
Warranty and Troubleshooting.
14
Tools
1002645548
1002645550
1002645551
1002645549
1002645546
220AA10017
Symbology
! Warnings