HQ-Power LPTDX402E Manual Del Usuario página 2

3. General Guidelines
• This device is a light controller for professional use on stages, in discos, theatres, etc. This
device should only be operated with an alternating current of max. 230Vac/50Hz and is
designed for indoor use only.
• Do not shake the device. Avoid brute force when installing or operating the device.
• Select a location where the device will be protected against extreme heat, moisture and dust.
• Do not use or transport the device under temperatures < 5°C or > 35°C.
• Familiarise yourself with the functions of the device before actually using it. Do not permit
operation by unqualified people. Any damage that may occur, will probably be due to
unprofessional use of the device.
• Use the original packaging if the device is to be transported.
• Note that all modifications of the device are forbidden for safety reasons.
• Do not remove the serial number sticker from the device as doing so will void the warranty.
Only use the device for its intended purpose. All other uses may lead to short-circuits, burns,
electroshocks, lamp explosion, crash, etc. Using the device in an unauthorised way will void
the warranty.
4. Features
• max. 10A per channel for a total of 40A
• DMX512-signal
• 2 signal inputs/outputs, either with a 3-pin XLR connector or a RJ11 telephone jack
• LED display
• soft-start function protects the load and prolongs the life of the bulbs
• automatic frequency tracking
• C3 dimming curve (professional device)
• adjustable DMX start address
• channel dimming test
• digitised analogue dimming with advanced C3 dimming curve
• manually operated fader
• suitable for rack and truss mounting (clamp included) & can also be placed on a table
5. Specifications
Power
Output
Signal Input/Output
Signal Connector
Dimensions
Mounting
Weight
LPTDX402E
AC 100-120V, AC 200-240V, 45-63Hz
max. 10A / channel, total 40A
DMX512 / 1990
3-pin XLR, 6P4C, RJ11 telephone jack
220 x 220 x 70 (W x H x D)
truss, rack, desktop operation
2.5kg
2 VELLEMAN