Picture Adjustment - Emerson LC195EM9 B Manual De Usuario

Picture Adjustment

You can adjust brightness, contrast, color, tint and sharpness.
1
Press [SETUP] to display the main menu.
2
Use [Cursor K / L] to select "PICTURE", then press
[ENTER].
or
3
Use [Cursor K / L] to select the item you want to adjust,
then press [ENTER].
or
4
Adjust the picture quality.
Picture Mode
Use [Cursor K / L] to select the desired setting, then
press [ENTER]. (Standard, Dynamic, Movie and News)
or
Brightness, Contrast, Color, Tint, Sharpness
Use [Cursor s / B] to adjust.
or
Brightness
Contrast
Color
Tint
Sharpness
Picture
Picture
Dynamic
Picture Mode
30
Brightness
Contrast 30
Color
30
Tint 0
Sharpness 0
Reset Settings
Neutral
Color Temp.
Back Light 0
Picture
Picture
Picture Mode Standard
Brightness Dynamic
Contrast Movie
Color News
Tint
Sharpness
Reset Settings
Color Temp.
Back Light
5
Brightness 30
Adjust Move Enter
ENTER
Contrast 30
Adjust Move Enter
ENTER
Color 30
Adjust Move ENTER Enter
Tint 0
Adjust Move Enter
ENTER
Sharpness 0
Adjust Move Enter
ENTER
Reset Settings
Use [Cursor K / L] to select "Reset", then press [ENTER]
to restore the "Picture Mode" settings to the default.
or
Color Temp.
Use [Cursor K / L] to select the desired setting, then
press [ENTER]. (Cool, Neutral and Warm)
or
Back Light
Use [Cursor s / B] to adjust the brightness of the backlight.
: To brighten
: To darken
Press [SETUP] to exit.
Note:
• To cancel picture adjustment, press [SETUP].
• When this unit is connected to PC or DVI devices,
you cannot select "Sharpness".
Cursor s Cursor B
to decrease to increase
brightness brightness
to decrease to increase
contrast contrast
to decrease to brighten
color color
to add red to add green
to make soft to make clear
Reset Settings Reset Settings
Cancel
This function resets the Reset
"Dynamic" setting for Picture
Mode to factory default.
Picture Picture
Picture Mode
Brightness
Contrast
Color
Tint
Sharpness
Reset Settings Cool
Color Temp. Neutral
Warm
Back Light
Back Light 0
Adjust Enter
ENTER
21
EN