JVC KS-BTA200 Manual De Instrucciones página 13

Setup / Settings /
SETTING
Bluetooth Audio
5
Open / OPEN *
Search / SEARCH * 5
Special Device / SPECIAL *
Connection / Connect /
CONNECT * 6
Disconnection / Disconnect
1
/ DISCNNCT *
6
Delete Pair / DELETE *
Setup / Settings /
SETTINGS
1
* Selectable only when the device is connected.
2
* Selectable only when your cellular phone is equipped with the function.
3
* Selectable only when your cellular phone is equipped with the voice recognition system.
* 4 Excluding type D.
5
* Selectable only when "New Device" is selected.
6
* Selectable only when the registered device is selected.
* 7 Not selectable for "New Device".
8
* If you wish to receive more information about Bluetooth, visit our JVC web site.
Change the settings. ☞ page 30.
Auto Connect / AUTO CNT You can set to connect a Bluetooth device
Auto Answer /
7
AUTO ANS*
2, 4, 7
Message Info *
Microphone Level /
Mic Setting / MIC SET *
8
Version / VERSION *
Make the unit ready to establish a new Bluetooth connection. Select this when
establishing a Bluetooth connection with a device for the first time, from the
device. ☞ page 12.
Make the unit ready to establish a new Bluetooth connection. Select this when
establishing a Bluetooth connection with a device for the first time, from the unit.
The unit searches for available new devices. ☞ page 14.
5
Shows the list of Bluetooth devices which requires some special procedure to
establish Bluetooth connection. Select a device you want to connect. ☞ page 15.
After selecting a device from among the registered devices, establish the connection
with it. ☞ page 17.
Disconnect the current device before connecting another device. ☞ page 18.
Delete the registered devices. ☞ page 16.
Change the settings. ☞ page 30.
8
Version / VERSION *
automatically when the receiver is turned on.
You can set the receiver to receive or reject the
incoming calls automatically.
You can set the receiver inform when you receive an
SMS/Text Message.
Adjust a microphone volume.
7
Display the software and hardware versions.
Display the software and hardware versions.
Introduction
11