For cameras compatible with the mounting unit
Mounting the Viewfinder
1.
Confirm that the POWER switch of the camera is "OFF".
2.
Insert the plug into the connection jack of the viewfinder.
<Note>
Be sure to insert the plug all the way into the connection jack.
3.
Push the viewfinder down into place.
4.
Tighten the stopper screw firmly.
Detaching the Viewfinder
1.
Confirm that the POWER switch of the camera is "OFF".
2.
Loosen the stopper screw and detach the viewfinder by pulling it straight up.
<Note>
Use both hands to detach the viewfinder. The viewfinder may not detach smoothly
with one hand, resulting in damage to the viewfinder.
3.
Disconnect the connection jack from the viewfinder cable connector.
Stopper screw
Stopper screw
E-10