Getting Started; Cancel The Demonstration; Set The Clock And Date; Set The Basic Settings - JVC KW-R930BT Manual De Instrucciones

GETTING STARTED

1

Cancel the demonstration

When you turn on the power for the first time (or [FACTORY RESET] is set to
[YES], 5), the display shows: "CANCEL DEMO" "PRESS" "VOLUME
KNOB"
1
Press the volume knob.
[YES] is selected for the initial setup.
2 Press the volume knob again.
"DEMO OFF" appears.
2

Set the clock and date

1
Press and hold .
2
Turn the volume knob to select [CLOCK], then press the knob.
To adjust the clock
3
Turn the volume knob to select [CLOCK ADJUST], then press the knob.
4
Turn the volume knob to make the settings, then press the knob.
Hour Minute
5
Turn the volume knob to select [CLOCK FORMAT], then press the knob.
6
Turn the volume knob to select [12H] or [24H], then press the knob.
4
ENGLISH
To set the date
7
Turn the volume knob to select [DATE SET], then press the knob.
8
Turn the volume knob to make the settings, then press the knob.
Day Month Year
9
Press to exit.
To return to the previous setting item, press
3

Set the basic settings

1 Press and hold .
2 Turn the volume knob to select an item (see the following table),
then press the knob.
3 Repeat step 2 until the desired item is selected or activated.
4 Press to exit.
To return to the previous setting item, press
SYSTEM
KEY BEEP (Not applicable when 3-way crossover is selected.)
ON: Activates the keypress tone. ; OFF: Deactivates.
SOURCE SELECT
AM SRC *
ON: Enables AM in source selection. ; OFF: Disables. ( 5)
SPOTIFY SRC *
ON: Enables SPOTIFY in source selection. ; OFF: Disables. ( 9)
BUILT-IN AUX *
ON: Enables AUX in source selection. ; OFF: Disables. ( 17)
* Not displayed when the corresponding source is selected.
.
.
Default: XX