Arcam rPlay Guia De Inicio Rapido página 10

iOS Users
Option 1: AirPlay Speaker Setup
1. Press and hold the SETUP button located on the rear panel of your rPlay for approximately 8 seconds.
2. Select the wireless network settings on your iOS device.
3. Go to the Wi-Fi settings on your mobile device and navigate to "SET UP NEW AIRPLAY SPEAKER... "
4. Select the speaker called "rPlay-XXXXXX" (where XXXXXX is a unique number assigned to the rPlay).
5. Select the network you want the rPlay to connect to and press "Next".
6. Follow the on-screen instructions to complete the rPlay setup as an AirPlay speaker.
Option 2: My Router Supports Wi-Fi Protected Setup
1. Press and hold the SETUP button located on the rear panel of your rPlay for approximately 4 seconds. The NET
LED will blink twice at regular intervals.
2. Press the Wi-Fi Protected Setup button
3. The rPlay will now connect to your network and the NET LED will stop blinking and stay on.
4. Download the DTS Play-Fi app from the Apple App Store.
5. Connect your mobile device to the same network that the rPlay is connected to.
6. Launch the DTS Play-Fi app and follow the on-screen instructions.
Option 3: My Router Does Not Support Wi-Fi Protected Setup
1. Download the DTS Play-Fi app from the Apple App Store.
2. Launch the app and you will be prompted to set up the new device. Follow the on-screen instructions and
complete the set-up.
3. Exit the app and access the settings on your mobile device.
4. Go to the Wi-Fi settings on your mobile device, select the wireless network called "PlayFi2DeviceXXXXXX" and
connect to it (where XXXXXX is a unique number assigned to the rPlay).
5. Exit the Wi-Fi settings and launch the DTS Play-Fi app again. Select your home wireless network and allow the
rPlay to connect to it. Once connected the NET LED will stop blinking and stay on.
6. The rPlay is now set-up and ready for use.
Option 4: Wired Connection To A Network
1. Download the DTS Play-Fi app from the Apple App Store.
2. Using the supplied Ethernet cable, connect the rPlay to your router and turn on the rPlay.
3. Connect your mobile device to the same network that you want the rPlay to be connected to.
4. Launch the DTS Play-Fi app and wait for the app to automatically detect the rPlay and connect it to your
home network.
5. The rPlay is now set-up and ready for use.
E-6
on your router.