Default Settings For The Controlpad - Alesis ControlPad Manual De Referencia

Please note: Depending on the soundcard you are using, you may
experience different amounts of audio latency, or delay between
when you hit the pads and when the sound comes out of your
speakers. In BFD Lite Standalone, you can adjust the latency by
For more information, please refer to A Note About Audio Latency discussion in the
Computer Installation chapter of this manual.
5. When you have successfully selected your audio device, you should
hear sounds when you strike the pads. You are now ready to jam.

DEFAULT SETTINGS FOR THE CONTROLPAD

The ControlPad has been initialized with a preset which
automatically maps all 8 pads to drum sounds in the BFD Lite
software. You can access this configuration by selecting preset 0
on the ControlPad while in Kit mode.
The configuration of the kit is as described in the graphic below:
TOM 2
MIDI NOTE
#45
CRASH
CYMBAL
MIDI NOTE
#51
In Windows, you can select the device by
clicking on the pull-down menu in the top
left corner of the screen.
clicking on the Cfg... (Configuration) button and
adjusting your soundcard's buffer settings.
TOM 3
MIDI NOTE #43
SNARE
MIDI NOTE #38
CLOSED RIDE
HI-HAT CYMBAL
MIDI NOTE
MIDI NOTE
#44
RIMSHOT
DRUM
MIDI NOTE
#40
MIDI NOTE
#49
KICK
#36
19