Advice On Use; Replacing Dust Bag - HAEGER Eco Matte Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

English
5. Insert the mains plug into a correctly installed power socket. Turn the device on by the
on/off switch by pressing down the button.
6. Set the "carpet/hard floor" switch, depending on the floor covering.
7. Adjust the suction power with the suction power control.
8. Vacuum at a steady speed. There is no need to exert pressure. Turn the suction power
control clockwise if you want to increase the suction power.

Advice on use

1. Dual position carpet / floor brush
Press the button to set the floor brush for use on floors and smooth or flat surfaces. This is
for cleaning PVC, floor-boards, marble, sandstone, parquet etc. Place the button to its
original position again when you wish to use the brush for carpets or soft surfaces.
2. Nozzle on hose grip
Remove the suction tube and work just using the nozzle on the hose grip to vacuum
curtains, lampshades, shelves or car seats etc. It is particularly useful for cleaning soft
materials.
3. Crevice adapter (multi-purpose crevice nozzle)
Use this nozzle to reach places that are difficult to
get into, such as curtain rails, recesses, corners and
narrow openings. When using this tool, you can
simply swivel the front brushes in or out to adjust
the way the crevice nozzle works to suit your
cleaning task. This tool can either be fitted to the
nozzle on the hose grip or on the end of the wand.

Replacing dust bag

NOTE: Turn off vacuum and unplug the electrical cord before changing dust bag or cleaning
motor filter. Never operate the vacuum cleaner without the dust bag or filter.
1. Detach the hose by pressing the two buttons at its end.
2. Press the (open/close) button to open the housing cover.
3. Remove the full dust bag from the holder.
4. Place a new dust bag into the holder.
4
Instructions for use

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Vc-70b.035a

Tabla de contenido