Eschenbach pure visionLED Instrucciones De Uso página 8

Assembling the luminaire foot
X Fix the lamp foot to the luminaire body
using the Phillips screwdriver supplied.
Operation
X Place the luminaire in the required location whilst observing the
safety information.
X Connect the mains adapter cable to the socket on the luminaire
body. Plug the mains adapter into a properly-installed 230 V~ do-
mestic mains power socket.
X Press the switch to switch the luminaire on or off again.
X Adjust the lampshade until it is in a
suitable position.
X Never use force when adjusting the
lampshade!
Disposal
X This product is subject to the European WEEE Directive on
waste electrical and electronic equipment in its currently
valid version. Dispose of your product via a certified dis-
posal facility or your municipal dispoal facility, not in the
household waste. Observe the rules applicable in your country. In
case of doubt, contact your disposal facility. Dispose of all packag-
ing materials in an environmentally friendly manner.
- 8 -