Service Information - BLACK&DECKER BT1400 Manual De Instrucciones

TROUBLE! DOES NOT MAKE ACCURATE MITER CUTS
WHAT'S WRONG?
1. Miter scale not adjusted
correctly
2. Blade is not square to
fence
3. Workpiece moving
TROUBLE! MATERIAL PINCHES BLADE
WHAT'S WRONG?
1. Cutting bowed material

SERVICE INFORMATION

All Black & Decker Service Centers are staffed with
trained personnel to provide customers with efficient
and reliable power tool service.
Whether you need technical advice, repair, or genuine
factory replacement parts, contact the Black & Decker
location nearest you.
Accessories
CAUTION: The use of any non-recommended
accessory such as dado sets, molding cutters or
abrasive wheels may be hazardous.
Specifications
BT1400 AR
Voltage 220V 220V 120V
Frequency 50Hz 60Hz 60Hz
Power 1500W 1500W 1500W 1500W 1500W
Printed in China
WHAT TO DO...
1. Check and adjust
2. Check and adjust
3. Clamp workpiece to
fence or glue 120 grit
sandpaper to fence
with rubber cement
WHAT TO DO...
1. Position bowed material
as shown in Figure 11
B2 B3 B2C
220V
50Hz
7/06/07
BR
127V
60Hz