Aiwa HV-FX9000U Instrucciones De Manejo página 22

Setting the VCR channels (continued)
ENTER/
DISPLAY
4
Press i or k to select AUTO CHANNEL SET,
then press j or l .
All available channels in your area are scanned and
stored in the memory of the VCR.
After scanning, the TV screen in step 3 appears.
AUTO CHANNEL SET
PROCEEDING
CHANNEL 11
TO EXIT PRESS
5
Press MENU to return to the normal screen.
If "C" flashes in the display window after
Auto Channel Set
Check the antenna connections and repeat the above
procedure from step 1.
If you still cannot receive the channels, set the VCR
channels manually. See "Adding or erasing VCR channels
manually".
(Presetting the VCR channels is necessary for recording TV
programs.)
CATV channels
CATV systems use letters and numerals to designate
channels. The table below shows the channel numbers of
the CATV system and the corresponding channel number
displayed on this VCR. For more information on available
channels in your area, consult your local CATV company.
Channels displayed on this VCR
01
02 to 13
14 to 36
37 to 94
95 to 99
100 to 124
125
13
ENGLISH
i/k
j/l
MENU
MENU
CATV channels
5A
2 to 13
A to W
W+1 to W+58
A-5 to A-1
W+59 to W+83
W+84
Tips
• When you perform the Auto Channel Set, the VCR
automatically selects the band (TV or CATV) in which there
are more channels to be preset. To check the band, press k
to select TUNING BAND in the TUNING menu.
• In the display window, "c" is for a CATV channel and "ch" is
for a TV channel.
Note
Once you conduct Auto Channel Set, the previous settings will
be canceled.
Adding or erasing VCR channels
manually
If Auto Channel Set does not set the VCR channel, add
them manually for recording TV programs.
You can also erase the unnecessary VCR channels.
1
Press MENU.
2
Press i or k to select TUNING, then press
ENTER/DISPLAY.
SELECT
TO EXIT PRESS
3
Press i or k to select TUNING BAND, then
press j or l to display TV or CATV.
AUTO CHANNEL SET
TUNING BAND : TUNING BAND :
CH. ADD / DEL :
SOURCE SELECT :
SELECT
TO EXIT PRESS
4
Press i or k to select CH. ADD/DEL.
AUTO CHANNEL SET
TUNING BAND :
CH. ADD / DEL : CH. ADD / DEL :
SOURCE SELECT :
ENTER ADD / DELETE
SELECT
TO EXIT PRESS
5
Press j or l to select the channel to be
erased or added.
When the selected channel has already been set, ADD
appears. When it has not been set, DEL appears.
AUTO CHANNEL SET
TUNING BAND :
CH. ADD / DEL : CH. ADD / DEL :
SOURCE SELECT :
ENTER ADD / DELETE
SELECT
TO EXIT PRESS
CLOCK
PROGRAM
TUNING
SETUP
ENTER ENTER
MENU
CATV CATV
CH.23 ADD
TUNER
ADJUST
MENU
CATV
CH. 23 CH. 23 ADD ADD
TUNER
ADJUST
MENU
CATV
CH. 25 CH. 25 DEL DEL
TUNER
ADJUST
MENU