Important Safety Information; Meanings Of Signal Words; Important Safety Instructions For Using All Power Tools - Metabo HPT C 3610DRA Manual De Instrucciones

English

IMPORTANT SAFETY INFORMATION

Read and understand all of the safety precautions, warnings and operating instructions in the Instruction Manual before
operating or maintaining this power tool.
Most accidents that result from power tool operation and maintenance are caused by the failure to observe basic safety
rules or precautions. An accident can often be avoided by recognizing a potentially hazardous situation before it occurs,
and by observing appropriate safety procedures.
Basic safety precautions are outlined in the "SAFETY" section of this Instruction Manual and in the sections which
contain the operation and maintenance instructions.
Hazards that must be avoided to prevent bodily injury or machine damage are identifi ed by WARNINGS on the power
tool and in this Instruction Manual.
NEVER use this power tool in a manner that has not been specifi cally recommended by metabo HPT.

MEANINGS OF SIGNAL WORDS

WARNING indicates a potentially hazardous situations which, if ignored, could result in death or serious injury.
CAUTION indicates a potentially hazardous situations which, if not avoided, may result in minor or moderate injury, or
may cause machine damage.
NOTE emphasizes essential information.

IMPORTANT SAFETY INSTRUCTIONS FOR USING ALL POWER TOOLS

READ ALL OF THE WARNINGS AND OPERATING INSTRUCTIONS IN THIS MANUAL BEFORE OPERATING OR
MAINTAINING THIS TOOL:
WARNING
When using this electric tool, take all necessary precautions to minimize the risk of electric shock or other
personal injury.
In particular, always comply with the following safety rules:
1. ALWAYS KEEP GUARDS IN PLACE and in working
order.
2. ALWAYS REMOVE ADJUSTING KEYS AND
WRENCHES BEFORE STARTING TOOL.
Always confi rm that all keys and adjusting wrenches
have been removed from the tool before it is turned
on.
3. ALWAYS KEEP WORK AREA CLEAN. Avoid injuries
by not cluttering the work areas and work benches.
4. NEVER USE
ENVIRONMENTS. Never use the power tool in damp
or wet places and never expose it to rain. Always keep
the work area well lighted.
5. NEVER PERMIT CHILDREN OR OTHERS TO
LOITER NEAR THE WORK AREA. Keep all people
(especially children) away from the work area. Always
unplug unattended tools and keep the work place
2
TOOL IN HAZARDOUS
SAFETY
tamper-proof by installing locks on the doors and
on the master switches. Always remove the lock-off
button from the tool and store it in a secure place,
when the tool is not in use.
6. NEVER FORCE THE TOOL. It will do the job better
and more safely if it is operated at the rate for which it
was designed.
7. ALWAYS USE THE RIGHT TOOLS. Never force a
tool or an attachment to do a job for which it was not
designed.
8. ALWAYS WEAR PROPER APPAREL WHEN
WORKING WITH THE TOOL. Never wear loose
clothing, gloves, neckties, rings, bracelets or other
jewelry which may get caught in the moving parts.
Always wear non-slip footwear, preferably with steel
toes. Wear protective hair covering to contain long
hair.