Kenwood CMOS-740HD Manual De Instrucciones página 6

Installation
Recommended Installation Position
Examples of correct camera installation on the
rear of the vehicle
Installation position
Mount so that the
"KENWOOD" logo appears
at the top.
Installing the Camera/Adjusting its angle
1
Decide the camera installation position.
2
Clean the camera installation surface.
Using a commercially available cleaner, wipe dirt,
moisture and oil away from the surface on which
the camera bracket is to be attached.
3
If required, separate the camera bracket from
the camera and adjust the shape according
to the surface on which it will be attached.
Bend
Bend
Camera bracket
4
Mount the camera on the camera bracket.
Secure the camera to the camera
bracket with the mounting
screw. (2 locations on each side)
Mount so that the "KENWOOD"
logo appears at the top.
Screw
(M3 × 5 mm)
6 |
English
Adjust the camera
bracket shape so
that it fits the camera
installation position.
The camera has two securing holes at the side at
the top and bottom.
Please adjust according to the installation.
Installation example
5
Fix the camera temporarily with tape, etc.
Using a piece of tape, etc., fix the camera
temporarily.
12345
Install the camera at the center of the vehicle and
not to hide the number plate. And also install
straight toward the forward/reverse direction
of the vehicle. Be careful not to lean the camera
toward other directions of the vehicle, etc.
6
Complete all of the required connections.
7
Display the camera video.
Before viewing the camera, apply the parking
brake and chock the wheels so that the vehicle
will not move. Otherwise, an unexpected
accident may result.
For displaying the camera video, read the
instruction manual for your video monitor.
Change the shift lever to the R (Reverse) range to
view the image of the rear of the vehicle.
8
Adjust the camera angle.
When adjusting the camera angle, be careful not
to stretch the camera cord.
Adjust the angle so that the rear of the vehicle
or the bumper can be seen at the bottom of the
monitor.
Vehicle rear part or bumper
OK NG