Connection - Miele ST 30 Instrucciones De Manejo

en - English

Connection

The steamer is equipped with a con-
nection for the Miele steam ironing
system.
^ Open the lid of the steam connection
by lifting it upwards.
^ Connect the steamer by plugging the
steam hose into the steam
connection.
Pull back the sliding mechanism on
the steam hose plug and release it
when it is plugged in.
18
The steamer is ready for use when the
* indicator light on the tower control
panel lights up and signals that the
steam is ready.
The burst of steam is controlled by
button a on the steamer.
For short bursts of steam:
^ Press the button briefly and release it
again.
For constant steam:
^ Press and hold the button.
Always steam the textile in the direction
of the fibres.
The distance between the steamer
and the textile is dependent on the
sensitivity of the fabric and can vary
between textiles.
Always test this first on an
unobtrusive part of the fabric.
a