Symbols - Ryobi P580 Manual Del Operador

The following signal words and meanings are intended to explain the levels of risk associated with this product.
SyMBOL SiGNAL
dANGER:
wARNiNG:
cAUTiON:
cAUTiON:
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SyMBOL
Safety Alert
V
Volts
Direct Current
n o
No Load Speed
Class II Construction
.../min Per Minute
min Minutes
Wet Conditions Alert
Read The Operator's Manual
Eye, Ear, & Breathing
Protection
No Hands Symbol
Recycle Symbols
Li - Ion

SyMBOLS

MEANiNG
Indicates an imminently hazardous situation, which, if not avoided, will result
in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could result
in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, may result in
minor or moderate injury.
(Without Safety Alert Symbol) Indicates a situation that may result in property
damage.
NAME
Indicates a potential personal injury hazard.
Voltage
Type or a characteristic of current
Rotational speed, at no load
Double-insulated construction
Revolutions, strokes, surface speed, orbits etc., per minute
Time
Do not expose to rain or use in damp locations.
To reduce the risk of injury, user must read and understand
operator's manual before using this product.
Wear eye protection with side shields marked to comply with ANSI
Z87.1 and hearing protection.
Failure to keep your hands away from the cutting wheel will result
in serious personal injury.
This product uses lithium-ion or nickel-cadmium batteries. Local,
state or federal laws may prohibit disposal of batteries in ordinary
trash. Consult your local waste authority for information regarding
available recycling and/or disposal options.
6 — English
dESiGNATiON/ExPLANATiON