Controls; Connectors; Indicators - Optimus PM-804A Manual De Instalación

PM-804A
8x4 Matrix Mixer

1. CONTROLS

Front panel
 CH1~4: Four Mic/Line Input Level with 3-band-EQ and output zone selector switches.
 CH5~8: Four Line Input Level with output zone selector switches.
 Output Level control with two Tone control and Mute switch.
 Monitor Level control with output zone selector switches.
Rear panel
 Volume controls for CH1~8 inputs.
 Priority switch for CH1 input.
 Phantom power switches for microphone inputs: CH1 and CH2~4.
 Alarm Message input volume control.

2. CONNECTORS

 Four XLR electronically balanced connectors and 1/4'' phone jack for CH1~4 inputs.
 Four 1/4'' phone jack / RCA connectors for CH5~8 inputs.
 Alarm Message input. Audio input and zone selection connectors.
 RJ45 connector for connecting WP-1 remote control panel (BGM and microphone inputs).
 3-pin euro block (H, C y GND) for four outputs.
 Four individual external mute and all mute interface.

3. INDICATORS

 Power, signal and CLIP for each input channel.
 Signal, -20 dB, -10 dB, 0 dB and CLIP for each output channel.
PM-804A Version 1.1 Page 3 of 11