Multilaser P3212 Manual Del Usuario página 40

4. Description of main function operation
• T he planned route and language prompt are the results calculated by the system, the driver
should drive based on actual road conditions.
• P lease follow relevant regulations and requirements for hardware during operation; otherwise, it
will result in system dysfunction or failure to response. In such cases, please power off the hardwa-
re equipment and power on the system again.
• P lease keep the storage card at readable state; otherwise, you cannot use the functions of storing
into directory and saving track, etc.
4.2.2 Enter GPS operating interface
• P ress NAVI key on the unit panel to enter the navigation system.
• W hen the navigation software cannot be found, press the general key as shown in Figure
7 in setting to enter general option interface as shown in Figure 8. Select the option of "Navigation
Route Setting" to enter the interface to select route of navigation software as shown in Figure 9.
Insert the memory card, select the operation file "*****.exe" of navigation software, and click "√" to
confirm it. Then press NAVI on the panel again or (the NAVI icon) on the main interface to enter
the operating interface of GPS system.
• A fter entering corresponding map software, please carefully read the operating instruction of map
software.
39