EXERCISE COMPUTER
SPECIFICATIONS:
TIME-------------------------------------------00:00-99:59 MIN:SEC
SPEED----------------------------------------0.0-999.9 MI/H
DISTANCE-----------------------------------0.00-99.99 MI
CALORIES-----------------------------------0.0-999.9 KCAL
FUNCTION KEY:
MODE: Press to select function (Scan, Time, Speed, Distance, Calories). Press and hold for 3
seconds to reset all values.
CLEAR: Press to reset value. This function is only available when the bike is stopped, and the
computer is not in SCAN mode.
OPERATION PROCEDURES:
1. AUTO ON/OFF: If the bike is put into motion or the MODE button is pressed, the computer will
activate and will remain active unless inactive for approximately 4 minutes. The computer power
will turn off automatically.
2. MODE: To select the LOCK MODE setting, press the MODE button when the pointer is on the
function you wish to display, then remove your finger from the button. Once locked, only the
selected function will be displayed.
FUNCTIONS:
TIME: Counts the total time of an exercise from start to finish.
SPEED: Displays the current speed being obtained.
DISTANCE: Counts the total distance of an exercise from start to finish.
CALORIES: Counts the total number of calories burned during an exercise from start to finish.
(The data is a rough guide which can not be used in medical treatment.)
SCAN: Automatically displays functions in the following order shown: time, speed, distance,
calories (repeat).
BATTERY: This computer uses two AA batteries. If the display appears incorrectly or becomes
difficult to read, please install new batteries.
13