Using The Lock; Power Supply; Installing Batteries - Fichet-Bauche Nectra Serie Manual Del Usuario

2. Using the lock

2.1 Power supply

The lock can be powered by :
- Batteries.
- External power supply (available as an option, for frequent use and time delay, please contact your
retailer).

2.2 Installing batteries

When the orange light flashes, batteries are flat and need to be replaced:
C Turn the keypad
C Separate the keypad housing from the keypad.
C Insert and connect battery (use a 9 volts alkaline battery : 6LR61 type).
The lock will beep twice to confirm the connection.
C
Clip on the keypad housing carefully not to trap the electric cable, then turn the keypad
C
clockwise to close it.
C An alarm sound is emitted each time the lock is woken up (the lock wakes up by pressing
a key after at least 10 seconds of inactivity) until a complete opening session has been
carried out.
Codes, settings and blockings are stored and protected during power cuts.
Nectra Serrure électronique. Version 1.
ELECTRONIC LOCK
anticlockwise.
30