Assembly And Connections - Ecler BET ACOUSTICS MASS1015P Manual De Instrucciones

TREBLES FREQUENCIES
For the trebles 2 compression motors are combined as an optimum solution with a neodymium
magnet with waveguides, thus obtaining maximum coupling between both transducers. Both waveguides
are loaded with a diffuser with 90º horizontal coverage, projecting a wave front that is 10" high.
If the mobile treble motor groups need to be replaced, the protective grille is removed so that they
can be removed from the front of the system.

4. ASSEMBLY AND CONNECTIONS

The acoustic enclosures of the MASS1015P system have been carefully studied and designed
for rapid, efficient and secure assembly, disassembly and storage of a line array:
 Handling and operation of the BET ACOUSTICS MASS1015P system is simple owing to the 4
transport handles.
 All of the units can be stacked together, forming easily handled, stored and transported clusters.
 The reduced weight and compact size of each unit facilitates their handling.
 The configurations can be kept assembled after events, both for transport as well as storage.
 The flying system between enclosures contains only one type of connecting rod for easy
disassembly of units.
 All fastenings are made with pins with magnetic heads for rapid handling.
 The elevation mechanism is easily disassembled.
 One single pin is used for all necessary functions as regards interconnection of units.
13