AEG FT 4925 Instrucciones De Servicio página 77

Display
Measurement completed
Time and Ambient Temperature
The device is supplied with an inserted battery. Remove the protective
film between the battery and the terminal. This protects the battery from
discharging during transport.
Set the time when you use the device for the first time or when you re-
install the battery. Then, the function of displaying the environmental
temperature and time will automatically start up.
1) Method of setting
Press the power button to switch the thermometer on.
Open the battery cap on the back, press the time-
setting button to start hour (hour number flashes) and
minute (minute number flashes) setting, and press the
button of scan to adjust the numbers. Press the time
set button to confirm (Refer to the Picture 6.1, 6.2).
2) Mode of display
When time has been set, the thermometer will display
the time and environmental temperature in turns while
not used to measure body temperature (Refer to the
Picture 6.3, 6.4).
Meaning
The thermometer switches off
automatically.
English
77
Action
(Picture
6.1)
(Picture
6.2)
(Picture
6.3)
(Picture
6.4)