Tabla de contenido
Publicidad
If no key is activated for 1 minute, the display will return to the default
state 1.0 without saving configuration changes.
Increase value / choose next parameter
Decrease value / choose previous parameter
Accept the chosen value and proceed to the next menu
Hold
Back to previous menu / return to menu 1.0 without saving
Power up
Directly to [
if SIL-lock is enabled
1.1
1.0
1.0 = Default state
Linie 1 shows status for channel 1
and channel 2.
Linie 2 shows output status for
channel 1, output current or tag no.
Linie 3 shows output status for
channel 2, output current or tag no.
Line 4 indicates whether the module
is SIL-locked.
1.1 = Only if password-protected.
1.2 If password has been set.
Line 1 symbols:
= OK. Flashing
Line 2 and 3 symbols:
channel 1 ON
channel 2 OFF.
Line 4 symbols:
Static dot = SIL-locked.
Flashing dot = Not SIL-locked.
= output is active.
9203 Solenoid / Alarm Driver
ROUTING DIAGRAM
]
= error.
Version No. V5R0
To default state 1.0
Continued on the page
Routing diagram ADV.SET
Safety Manual
11
Publicidad
Capítulos
Tabla de contenido
