Installing The Hard Disk - König Electronic SEC-DVR202S Manual De Uso

Introduction:
Compact hard disk recorder for basic CCTV systems. The built-in quad processor enables you to get a
full overview on a single screen. The 12V connection is ideal for mobile use, and the removable HDD
tray allows you to easily change the drive. With mouse for easy control: USB port for media backup. A
remote control is included.

Installing the Hard disk:

1. Remove the HDD rack.
2. Connect power cord and data cable to the hard disk drive. Use the supplied screws to fix the hard
disk to the HDD rack.
3. Slide the HDD rack back into the HDD recorder. You can lock the HDD rack with the integrated
lock.
Connections:
1. Connect the video output of the recorder (BNC) to the input of a monitor or TV set.
2. Connect the cameras to the video input of the recorder (BNC).
3. Connect a PS/2 mouse with the PS/2 port shown below on the system.
4. Connect the PS/2 mouse before starting up the DVR system.
5. Connect the power adapter to the 12V input on the recorder.
Operation:
Connect the power adapter to the adapter jack at the rear of the DVR. It will boot up the system. If
installing a new hard disk drive, it will prompt for HDD formatting before the system starts to run (see
Fig. below). Press the "PLAY" button to select the formatting option.
1.2.0
ENGLISH
2