Diagonal Struts; Assembly; Tools And Fastenings Required; Basic Rack Assembly - Garant General-purpose rack Manual De Instrucciones

4.3

Diagonal struts

For additional stability of free-standing or single racks.
2 diagonal struts are recommended per 3 m rack length.
When arranging racks in a row, please observe the following diagram:
5.

Assembly

5.1

Tools and fastenings required

5.2

Basic rack assembly

Attach the plastic base plate to the rack support from below and
hammer it down using a plastic hammer if necessary.
1818
No tools are required to erect the rack.
A hammer is useful during assembly to ensure that the storage shelf
pins are fl ush with the storage shelf.
It is recommended to install the fi rst storage shelf as close to the fl oor as
possible to ensure stability.
Maximum free buckling length (height of the fi rst storage shelf from the
fl oor): 600 mm
➊