Avoiding Physical Damage And Malfunctions; Intended Use; Use Contrary To The Intended Purpose - Garant 93 1401-93 4317 Manual De Uso

3.1.3. Avoiding physical damage and malfunctions

Impermissible battery
Overheated battery
Incorrect mains voltage

3.2. INTENDED USE

Use the workbench only when in good technical condition, with awareness of the safety require-
ments and potential hazards. If any faults occur which may affect safety, have them rectified
without delay.
 Repairs by Hoffmann Group Customer Service.
 Workbench with electric height adjustment for ergonomic performance of assembly and in-
spection work.
 For work in indoor industrial environments. For use on dry solid floors.
 Drawers for storage of tools.
 Storage shelf for storage of workpieces and tools.

3.3. USE CONTRARY TO THE INTENDED PURPOSE

 Do not place or position on the workbench. Not for transporting people.
 Not for use in areas where the floor slopes upwards or downwards.
 Not for use in areas where the floor is loose or unpaved.
 Do not overload the workbench, worktop, drawers or storage shelves.
System defect, risk of fire and injury due to use of an in-
compatible or incorrectly connected battery.
» Use only the battery supplied.
» Do not operate the battery in parallel or in series.
» Do not reverse the polarity.
» Do not swap over the inputs and outputs.
» In the event of a defect, have the battery replaced by a
new model of the identical type.
System defect due to insufficient availability of cooling
air, leading to overheating of the battery. The battery is
equipped for forced air cooling.
ü Air must be able to circulate freely around the battery
casing.
» Ensure adequate supply of air.
» Do not mount the battery directly on the rear panel of
the workbench.
System defect due to operation of the spindle lift system
with an incorrect mains voltage.
» Operate the spindle lift system only with the mains
voltage specified on the nameplate.
» Use only the mains cable supplied.
www.hoffmann-group.com
en
43